Yes.
It is an interference engine.It is an interference engine.
A ( 2004 to 2006 ) Chrysler Pacifica 3.5 litre V6 engine has a timing BELT A ( 2006 to 2008 ) Chrysler Pacifica 3.8 litre V6 engine has a timing CHAIN A ( 2007 and 2008 ) Chrysler Pacifica 4.0 litre V6 has a timing BELT
Yes.
On a 2004 Chrysler Pacifica, cylinder 6 is located at the rear of the engine on the driver's side. The Pacifica features a V6 engine layout, where cylinders are numbered from the front of the engine to the back. Therefore, cylinder 1 is at the front on the passenger side, and cylinder 6 is positioned at the back on the driver's side.
You have to remove the intake plenum to access.
Yes.
the 3.5 engine (when changing the filter) takes 5.5 qts.
The EGR valve on a 2.5L 2005 pacifica is located behind the engine on the right hand side. shouold be same on '04It is on the driver side rear of the engine.
It is on the starter.
There is not a fuel filter to change on a 2004 pacifica. They use the sock in the tanks for that, apparently.
It is between the heads, under the lower intake manifold.
Yes