no the 3.8 is a v6 and the 302 is a 5.0 v8
A wiring schematic for a ford 38 engine can be found through Ford related service manuals. The manuals depict the original factory placements of the harness and parts of the engine.
I use 38 thou
Yes, a 351 windsor intake will fit a 302 engine as long as it is a 1976 or above. Although you will have to change the bolts, but yes it will work. 38 year certified mechanic
The highest temperature is 302 K.
1.2L (28 kW / 38 PS / 38 hp) is the power of the ford Taunus 12M wagon 1962 engine and its maximum speed is 128 km/h (80 mph).
Ford vans typically have large tires, in the range of 38 inches. This is the same for the 1986 E250 van.
15 tons
Infinite/Countless
38-- It was 1901
Start with 4.5 qts. Top off until full and make note of the amount.
The .38 Special is a specific cartridge. In addition to the .38 Special, there are perhaps a dozen different .38 cartridges. Most of them are fairly obscure/ obsolete today, but include the shorter, fatter, less powerful .38 S&W, the .38 Long and Short Colts, the .38 rimfires, .38 Merwin & Hullbert, etc. Sort of like "What is the difference between a Ford Mustang and a Ford?"
A 1999 Ford F-250 typically has a coolant capacity of about 30 to 40 quarts, depending on the engine type. For example, the 5.4L V8 engine holds approximately 30 quarts, while the 7.3L diesel engine can hold around 38 quarts. It's important to check the owner's manual for the specific engine configuration to get the exact capacity.