Yes, that is your only 2 options.
The fuel pump is in the fuel tank, replacing it requires dropping the tank. If this is above your skill level, I suggest taking it to a shop.
By taking out the back seat
NO
Actually , to change the fuel pump involves dropping the gas tank
It involves dropping the fuel tank. Our Haynes manual describes the procedure perfectly. If you are looking at dropping your fuel tank, I'd run out and buy a service manual of some sort.
Not on a stock fuel injected car. The pump is in the tank.
No,The Tank Will Have To Be Removed GOOD LUCK
replacement of the fuel pump requires dropping the fuel tank. follow the fuel lines where they end is the location of the pump.this repair is difficuld even for experienced mechanix I recommend taking it to a shop...
You got to change the fuel sending unit which involves dropping the fuel tank , aint really a bad job if you have a lift
Either change fuel filter or fuel pump...
Well, hello there! To change the fuel pump on a 1993 Mercury Villager, you'll want to start by relieving the fuel pressure, disconnecting the battery, and removing the fuel tank. Once the tank is out, you can access the fuel pump and replace it with a new one. Take your time, enjoy the process, and remember, there are no mistakes, just happy little accidents.
If there is an access panel in the trunk or under the rear seat you may not have to remove than tank. Otherwise the fuel tank will have to be removed to access the fuel pump. Be sure and change the fuel filter.