Yes, the 1991 Geo Metro is equipped with a fuel cut-off switch, often referred to as a fuel inertia switch. This switch is designed to cut off fuel flow in the event of a collision to prevent fuel leaks and potential fires. It is typically located in the passenger compartment or near the fuel pump, and can be reset manually if it has been triggered. If you're having trouble starting the vehicle, checking this switch might be a good step.
The fuel pump is located in the fuel tank.
You replace it you do not fix it.
on top of tank
Yes, the 1991 Metro was carburated. Metro's were carburated from 1988 - mid 1992. Some metros had fuel injection but those are rare nowadays.
changing the thermostat in a 1991 geo metro 1.3 liter
how can I cheek the heater fan on my 1990 geo metro to see if it is bad or if the switch is bad. I want come on at all when you turn the switch on check fuses and they are good.
The '97 Geo Metro (Base, LSi or XFi) does not have a fuel light.
The 1991 Geo Metro EGR valve can be located on the air cleaner housing. The valve will be on the back of the housing.
Behind the battery under the black cover on the driver side of car.
The fuel pump is in the gas tank. Remove the tank, then the rectangular plate on the top of the fuel tank. The electric fuel pump is just inside. If you would like specific directions let me know and I'll get them to you. Mr Geo Metro leehduncan@verizon.net
On a 1991 Geo Metro, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the fuel tank from the vehicle, as the pump is not externally accessible. It's advisable to disconnect the battery and relieve fuel system pressure before attempting to remove the tank for safety.
When the fuel pump goes out on 92 geo metro is it sudden or slow