0
What else can I help you with?
Where is the water pump located on a 1994 Chevy Cavalier?
If you have a 2.2 liter 4 cylinder, the water pump is under the alternator on the passenger side and below the serpentine belt tensioner.
How do you change the serpentine belt on at 2004 Subaru Outback?
Subaru 4 cylinder does not use a serpentine belt. The 6 cylinder instructions are rather simple, same as my '88 Cavalier and I presume any car that uses a serpentine belt. This comes from the factory service manual: remove collector cover install tool to tensioner pulley installation bolt rotate tool clockwise to loosen the belt and remove install in reverse order
How do you tighten the belt on a 98 Chevrolet Malibu with a 6-cylinder 3100 motor?
You don't - it is a serpentine belt with an automatic tensioner.
Does a 1992 Chevy Cavalier have a serpentine belt?
the 3.1 liter v6 and the 4 cylinder both have sepentine belts
How do you change serpentine belt 98 4runner 4 cylinder?
Find the appropriate size socket to go on the belt tensioner, put it on a ratchet or breaker bar. Rotate the belt tensioner counterclockwise, and that'll loosen the slack and allow you to remove the serpentine belt.
Where can I find a diagram of a serpentine belt for a 2001 Isuzu Rodeo 6-cylinder?
When changing the serpentine belt it is important to have a diagram. The diagram of the serpentine belt of a 2001 Isuzu Rodeo 6-cylinder can be found in its manual or a print out can be obtained at an auto part store.
How does one adjust the serpentine belt on a 1991 Mercedes 300E 6 cylinder?
There is an adjuster on the power steering pump. One cannot adjust it as it has an automatic tensioner if the belt is squeaking it is time to replace belt/tensioner or both
How do you remove the serpentine belt on a 2000 Dodge Dakota 4-cylinder?
Take pressure off belt tensioner and belt should slide off pulleys
Why do i only get pressure to drivers side left front and passenger rear after changing wheel cylinder on 97 cavalier?
Did you bleed the air out of the hydraulic system after changing the wheel cylinder? If not, you must do so.
How do you tighten a serpentine belt on a 2004 Toyota solara with a 6-cylinder engine?
To tighten the serpentine belt on a 2004 Toyota Solara with a 6-cylinder engine, first, locate the tensioner pulley. Use a wrench or a ratchet with a socket to rotate the tensioner counterclockwise, which will relieve tension on the belt. Once the belt is properly aligned on all pulleys, release the tensioner to apply tension to the belt. Ensure the belt is secure and properly seated on all pulleys before closing the hood.
How do you change a serpentine belt in an 02 Olds Alero with a 4-cylinder stick?
In order to change the serpentine belt for a 2002 Oldsmobile Alero, you must obtain a copy of the serpentine belt routing diagram from the manufacturer. Follow the routing diagram. Use a serpentine belt tool for loosening the tensioner. In order to position the belt, use a belt placement tool.
How do you replace the serpentine belt on a 1990 Chevy Cavalier 4 cylinder?
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
