Only with a saw. Not recommended. It is a critical component to the overall body stiffness and ride characteristics. Lance
In my opinion, it is best to come from the inside of the wheel well and get to them this way. Now I know that CorvetteDon, (member at Smokinvette.com) will have the diagram to show you in pics exactly on how to do this! Good luck!
Long Way to the Top - 2001 is rated/received certificates of: Australia:G
if you dont have a slot on console you have to pop remove the center console plate on top there a release under there
No you do not need to remove the bumper. You just need to remove the assorted hardware on top of the radiator including the metal rail - no need to disconnect the hood release cable, just lay the metal rail out of the way.
easy way slide down spare tire carrier top bolts remove with a rachet wrench its either a 13 or a 14mm and the bottom bolts are easy NOTE SHOCKS COME WITH SPRINGS COMPLETE DO NOT REMOVE SPRING
It's deep in the engine. You'll have to remove the top intake air and work your way down from there.
Easy way is to remove the battery and take out the oil filter from the top.
I think the easiest way is to remove the 4 bolts that hold the box of the truck on. Once these are removed, you and a couple helpers can lift and slide the box back about 18 inces to get access to the top of the fuel tank. You can easily remove the fuel pump/sending unit from the top of the tank now. This is an easier way than lifting the truck and dropping the tank.
You should have C.O.P. ( coil on plug ). Just remove the coil, and remove the plug the normal way.
No, a Lamborghini would be half way to china by time the corvette got to 60mph
is there a quick way to remove alternator
YES you do have to remove it all the way. There are 2 knock sensors under the intake.