The location of the fuses is marked on the fuse block cover. If the cover is gone you can go to the owner's manual to check out what fuses go where.
I have a 1999 concord engine 3.2 and I was told it is on the lower radiator hose on the engine block side.
On a 1999 Oldsmobile Alero, the knock sensor is located on the engine block. It may be bolted to the intake manifold, or to either side of the block.
Not directly. There are fuses for the engine computer and it is what turns the light on.Not directly. There are fuses for the engine computer and it is what turns the light on.
It is on the back of the block, above the oil pan and left of the exhaust.
The engine number for a 1999 Ford Windstar is typically located on the engine block itself, often near the front or side of the engine. You can usually find it on a flat surface or a machined pad on the block. Additionally, it may be stamped or printed on a label. For precise location, consulting the vehicle's service manual can provide specific details.
On a 1999 Ford Ranger XLT with a 4-cylinder engine, the freeze plugs (also known as core plugs) are located on the engine block. Typically, you can find them on the sides and rear of the engine block, as well as on the front of the cylinder head. Their main purpose is to prevent the engine block from cracking due to freezing coolant. Accessing them may require removing certain components, depending on their location.
in the engine compartment below the dashboard and behind the glove compartment
the flasher fuse is in the fuse block look in your owners manual under fuses
On a gas engine equipped truck it is part of the fuel pump module in the tank. On a diesel truck it is on the driver side of the block.
It is screewed into the passenger side of the engine block just in front of the starter. You will have to slide in under the truck on that side to see it.
You could have a cracked engine block.