Check your oil and see if coolant has leaked into the engine...A known problem with 3.8L engines are defective intake manifold gaskets that allow coolant into the engine block. Costly repair.
Typical causes of a compressor not running are: low coolant, blown fuse in compressor circuit, bad compressor, bad temperature sensor.
There should be a second sensor, located near the exhaust manifold. One snesor controls the fan, the other controls the gauge.
is the check engine light on? if so it may be the coolant temperature sensor...happened to me...if it doesnt turn over at all try the starter or the battery
If your flower doesnt bloom, that usually means that you are not taking that much care of it, and that can sometimes bring bad luck
Sounds to me the coolant temp sending unit has failed. Replace it with a new one.
it doesnt
Because it doesnt want to.
sometimes he trains sometimes he doesnt
usually you can tell when your car doesnt turn or or doesnt turn over its because of your starter sometimes its not the starter it could be a low battery or corroded wires leading to the starter check that first;
There has been some talk that the Mercury Villager doesnt have a great cooling system, sometimes a bigger radiator replacement might help.. but either way you have to keep the coolant, timming, etc in perfect state. The reason why it goes from normal to hot then back to normal is because that is usually when the temperature rises hi enouth for the thermostat to open up and lets the cooling back in circulation thru the whole system...
I dont know what kind of car u are talking about,but it souns like it could be the coolant temp sensor.
It can be sometimes and sometimes it cant. Like when it helps you and when it doesnt