0
From Pg. 22 of the owner's manual...
OIL LIFE
This displays the remaining oil life.
An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or 12 months) perform the
following:
1. Press and release the SETUP button to display "OIL LIFE XXX%
HOLD RESET = NEW".
2. Press and hold the RESET button for two seconds and release to reset
the oil life to 100%.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or 12 months to another value, proceed to Step 3.
3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the
RESET button to change the Oil Life Start Value. Each release and press
will reduce the value by 10%.
Note: Oil life start value of 100% equals 7,500 miles (12,000 km) or
12 months. For example, setting oil life start value to 60% sets the oil
life start value to 4,500 miles (7,200 km) and 219 days.
What else can I help you with?
How do you reset oil change warning 2010 ford escape?
To reset the oil change warning on a 2010 Ford Escape, first turn the ignition to the "On" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn the ignition off and start the engine to ensure the oil change light is reset. If successful, the warning light should no longer be illuminated.
How do you reset 2005 ford escape check engine light?
Have vehicle scanned
2002 Ford Escape where is the fuel pump reset?
where is the fuel reset in ford escape 2002
How many miles before obd codes reset on 2001 ford escape?
The light won't reset until the problem is fixed.
How do you reset the low tire pressure light on a 2010 Ford Escape?
To reset the low tire pressure light on a 2010 Ford Escape, first ensure that all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "On" position without starting the engine. Press and hold the tire pressure monitoring system (TPMS) reset button, usually located under the steering column, until the light blinks three times and then turns off. Finally, start the engine, and the light should remain off if the tire pressures are correct.
How many valves does the 2010 Ford Escape have?
The 2010 Ford Escape has 16 valves.
How do you reset the coolant light on a 2003 Ford Escape?
Push the red reset button under the spare tire in the rear of the vehicle. That should take care of it.
How do you reset change oil soon light after you change oil on a 2009 ford escape?
To reset the "Change Oil Soon" light on a 2009 Ford Escape after changing the oil, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and start the engine to ensure the light has been reset. If the light remains on, repeat the process.
How do you reset the oil change on 2008 ford escape?
To reset the oil change light on a 2008 Ford Escape, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Afterward, turn the ignition off and then back on to ensure the oil change light has been reset. Check the instrument panel to confirm that the light is no longer illuminated.
What size engine does the 2010 Ford Escape have?
The 2010 Ford Escape has an inline 4 engine.
Is the 2010 Ford Escape electric or gas?
The 2010 Ford Escape is a gas-powered vehicle.
Where is the reset button for computer after oil change on a 2005 ford escape?
On a 2005 Ford Escape, the reset button for the oil change light is typically located on the dashboard. To reset it, turn the ignition to the "on" position without starting the engine, then press the gas pedal three times within five seconds. This should reset the oil change light. If your model has a different setup, consult the owner's manual for specific instructions.
