ITS WITH THE WIPER MOTOR ITS ALL ONE UNIT
it seems to me that you are having issues with the body control module as this module controls your intermittent wiper speed and the rest of the speeds are controlled directly by the wiper switch . regards , ashish
There isn't a control board - the controls are all in the switch.
How do I replace the windshield wiper switch?
The combination, or multi function switch is the switch you use to turn on the blinkers, the windshield wipers, and cruise control. Oh and it's on the steering column, left side.
The fuse, if not, then the switch, then the motor, but by then you will also need a test light and/or a DMM.
That depends on what you're calling the "control module". There is a switch that controls where the wiper blades "park". It's inside the wiper motor assembly. In fact, most of the controls, except the switch on the steering column, are inside the wiper motor.
on the signal light switch
there will be a separate heated windshield switch below the window lock switch.
The windshield wiper relay switch can be found on the firewall in the engine compartment. The windshield wiper relay switch will be on the passenger side of the firewall.
The relay switch for the washer motor on a 2001 model Peugeot 406 Estate is located at the controls of the windshield washer. It is near the washer fuse.?æ
A bad relay switch will cause the windshield wipers to not turn off. Replace the relay switch and the windshield wipers should turn off.
The heater vents above the stereo can be easily pried out. This should expose the mounting screws for the panel.