== == == == Anyway, that should take care of the clicking. It worked for me.
== ==
I've just started having this problem too on my 2002 Malibu. I have found a lot of intermitted turn signal issues, especially for the 2000-01 Malibu, but I am still searching for info on the clicking (turn signal) sound from the dash.
the clicking sound is the blinker. when you signal to turn with your blinker the light flashes and makes a clicking sound.
the flasher relay.
It's the brake calipers. Probably around $400 to replace in a shop.
It is behind the radio. So you will need to take out your center console and radio to get to it. It should be a little black box. If your turn signal still make a clicking sound, you can put your ear near it and hear the clicking sound.
Under the dash on the drivers side; Turn on the turn signal (if it works) and follow the clicking sound.
When you use your turn signal flashers, the clicking sound typically associated with turn signals may not be audible due to a few reasons. Some vehicles are designed with electronic flashers that operate silently, eliminating the clicking noise. Additionally, if the vehicle's turn signal relay is malfunctioning or if there's an issue with the speaker that produces the sound, you may also not hear the clicking. Lastly, if the vehicle is very quiet or if you're driving at high speeds, external noise may drown out the clicking sound.
press the turning signal idiot
probably have a bad relay, that was my problem.. Are your turn signals not working, but your hazards lights are? and if so, do you hear a constant clicking sound, like your turn signal is turned on? Does the clicking sound go away when you hit the brakes? It is the relay.
probably because you have your turn signal on. LOL sorry, couldn't resist
I have a clicking sound like the turn signal Is on and its not hit the breaks and the sound stops what is it this is on a 2000 Lincoln towncar
Flasher is under the dash, drivers side, follow the clicking sound the signal makes when turned on. That sound comes from the flasher. If signal is staying on it could be you have a bulb or two out. Check your signal lights before replacing the flasher.