remove the inner door trim, pull the dust plastic off to reveal access holes, find the wire coming from the mirror [note the routing of the wire] carefully release wire connector [ if it is cold harm with a hair dryer] remove the three attachment nuts at the inner side of the mirror, you will need to force the rubber seal to release the mirror but have an other person hold it for safety good luck
Replacing the side mirror will cost approximately $200. You can save is much as $125 by replacing the mirror yourself.
To replace the passenger side mirror on a 2008 Pontiac Grand Prix, first, carefully pry off the plastic cover on the interior door panel to access the mirror's mounting screws. Remove the screws securing the mirror to the door and disconnect the electrical connector if your mirror has power features. Install the new mirror by connecting the electrical plug (if applicable), securing it with screws, and replacing the plastic cover. Finally, test the mirror to ensure it functions correctly.
The housing is broken not the actual mirror
How_does_one_replace_a_side_mirror_on_a_Pontiac_G5
The ECM is located on the driver's side, under the hood on a 2003 Pontiac Montana. It is on the driver's inner fender.
Yes, it can be repaired?
You have to remove door panel
Passenger side, open the door it should be on the right side
In a 2003 Pontiac Montana, the fuse for the cigarette lighter is located in the fuse box under the dashboard on the driver's side. Look for a fuse labeled "CIG" or "Lighter." If the fuse is blown, replacing it should restore functionality to the cigarette lighter. Always consult the vehicle's manual for specific fuse ratings and locations.
The 2003 Pontiac Montana EGR valve is located on the firewall. The valve will be on the driver side of the firewall.
windshield trim loose and Pontiac issued a bulletin for right side window trim.
You will need to remove the inside door panel in order to replace the side mirror. With the door panel removed you will find the side mirror is held in place by two retaining bolts. Remove the retaining bolts. Reverse the process to install the new side mirror.