0
What else can I help you with?
Where is the radiator drain plug located on a 1998 Chevy cavalier?
Some radiators dont have a drain plug and the ones that do is hard to reach. Its easier and quicker to remove the lower radiator hose. (passenger side,below the engine)
Where is the radiator drain plug for a 1992 Chevy Beretta?
it is on the side almost at the bottom of the radiator..very hard to get too !!!!
How do you remove a shift knob on a 1994 Toyota pickup?
Twist, hard!
How do I remove a radiator out of a 1998 cad eldorado?
How hard is it to remove and is there a digram procedure available on-line to remove it.
Where is the radiator drain plug on 1998 Chevy truck 5.7 v8?
It will be on the inside right bottom side of radiator. HARD TO SEE.
How would gas get in the oil in a 1993 4.6L V6 Chevy pickup?
that is a very hard question
How do you change out radiator on a 97 STS Northstar?
Not to hard. Take off front black cover. Take off top radiator hose. Remove cooling fans. remove front air bag sensor. remove lower radiator hosei Remove upper and lower cooling lines on both sides of radiator Remove 4 top radiator cover bolts. Remove radiator
How do you remove the radiator on a Pontiac Montana?
It is hard but just go to autozone.com and they have an OK instruction for this!
How do you change a starter on a s10 pickup?
Depends on the year I guess. I have a 2002 Chevy S-10 and I had to remove the exaust pipe from underside of the starter and then just unbolt and remove...not hard once the pipe is off. You will need a socket wrench and a long extention to reach the bolts on the top of the pipe.
How do you drain the radiator on a 2000 Dodge Stratus V6?
there is a plug on the bottom of the radiator The drain plug is on the lower passenger side of the radiator. It is very hard to get to. It is easier to just remove the lower hose.
Why does my 97 Chevy pickup idle high when i come to a stop i have to hold the brake hard till the idle drops?
check for vaccum leaks
Where is the oil sending unit on a 1984 Chevy pickup?
It is screewed into the top of the engine block right behind the distributor. It is hard to get to. Real trickey.
