To be able to remove the hose off of the accumulator, you need a special quick disconnect tool to remove the hose off of the accumulator. Can be found at your local parts store. Its gonna be big in diameter. Might want to get a assortment of sizes ranging from 1 inch on up in size.
In a 2002 Monte Carlo, the orifice tube is located in the air conditioning system, specifically in the refrigerant line between the evaporator and the accumulator. To access it, you'll typically need to remove the accumulator and the associated components. It's important to ensure the system is properly evacuated of refrigerant before attempting to replace the orifice tube.
Tools needed to replace front brakes 2002 Ford Focus?
It will cost you about $743.00 to replace a vacuum tube on a Ford Focus 2002.
In the passenger side wheel arch. You have to remove the wheel & liner to get at the valve.
How do you remove and replace wiper switch on 2002 Chevy Cavalier
I am looking to replace my timing belt on my 2002 Ford svt focus. I need a diagram or step by step process.
The 2002 Ford Focus windshield washer tank is held in place by four retaining bolts. Remove the retaining bolts and the windshield washer hose. Reverse the process to install the new windshield washer tank.
This one's a no-brainer. Go to Auto Zone, et al, and purchase the hose, look at the other one, remove and replace.
Take it to a refrigeration mechanic who knows what he is doing.So the above answer was completely unhelpful. I just went through this whole process and hopefully it'll save some time. When you replace the AC accumulator you have to replace the AC hose assembly, and believe me they're not lying at the Auto Part store when they say it requires it cause the updated drier line is a different size. First you bleed your AC system, then remove the hose assembly. Then you need to remove the drier line so you'll have to take off the front right tire, and the wheel well. Then you need a special tool to remove the drier line which is a little plastic round tool that you use to place over the hose. It's called "AC/Fuel Line Disconnect Tool Set"
Remove and replace it.
From the inside.
About $300.