Rent a clutch fan removal tool from an auto parts store.
Or, use a vice grip and long pipe on a single water pump pulley bolt and a channellocks on the fan, but say goodbye to your knuckles
You need to buy the special wrench for it or make one of your own.
This is a Dodge Ram 2500 Van that was converted.
Pull up on the tabs and remove the bulb.
the flashers in the 1995 - 2500 ram van are located behind the glove box - have to remove inside of glove box to see them.
You need a recovery/recycling machine. You will have to take it to a shop.
What about it? Remove the fan shroud, remove the fan itself, unbolt the water pump.
With a fan clutch removal tool from an auto parts store.
To remove the fan motor on a Dodge van, first disconnect the vehicle's battery to ensure safety. Next, remove any necessary components that obstruct access to the fan motor, such as the shroud or radiator hoses. Disconnect the wiring harness from the fan motor, then unbolt the motor from its mounting bracket and carefully pull it out. Finally, install the new fan motor by reversing the removal process.
On top of the engine block. You'll need to remove the inside engine cover
how to replace the fuel pression regulator for a dodge ram 2500 1997 van.
It will bolt in, but it will not work. The 1995 uses a hydraulic governor. The 1996 uses an electronic governor.
driver side of dashboard. remove black cover