remove wheel. takeoff brak caliber look for 2 pins that you have to drive out (top and botom) or there may be 2 bolts. Use a pry tool to wiggle off caliber as break pads are holding it on at this poit rotor will pull right off
Warped rotor. You will have to remove it and have it trued or replaced. Replace the pads at the same time. Do both front wheels.
Pretty simple, Remove the tires, remove the break caliper, pull off the rotor and replace. You should use new break pads when ever changing the rotor on any car.
Remove caliper,rotor comes right out
To remove the front rotors on a 2002 E-250 van, first, lift the van and secure it on jack stands. Remove the front wheel and then take off the caliper by unbolting it and hanging it out of the way. Next, remove the caliper bracket, if applicable, and then the rotor should slide off the hub. If the rotor is stuck, gently tap it with a hammer to free it.
The front hub takes a 35mm deep socket. (It is not necessary to remove the hub to change the rotor.)
What size is the nut on the front break system to take the rotor off. Of my 2002 Trailblazier LT 4.2l 4x4.
To remove the front rotors on a 2002 Infiniti QX4, first, lift the vehicle and remove the front wheels. Next, take off the brake caliper by unbolting it and securing it to prevent strain on the brake line. Remove the caliper bracket if necessary, then detach the rotor by removing any retaining screws and gently tapping it if it’s stuck. Finally, slide the rotor off the hub.
Should be the "peel off" type Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub assembly
how to remove front bumper 2002 Impala
remove front tires(19mm) turn wheel to one side, unbolt caliper(2 bolts) from side with bolts easily accessable, pull off caliper from rotor(may need to use large screwdriver to pry off), then remove rotor (if rotor never been removed, you may need to cut the locking washers off the wheel studs, and you may need a blow hammer to hit rotor, unless your replacing rotor with new, hit with any hammer!!!
please tell me how to remove the bering and rotor?how do i get the answer?
Replace rotor / cut rotor & replace brakes.