I'd have a body and fender man com by the house and take the right front fender off the truck along with the battery, overfill and ECM (computer). The rest you can figure out yourself as the part you are looking for is in the black plastic box on the firewall. When you finish up put in one can of freon and check for leaks. If no leaks call the guy back and have him put the fender and parts back on. I gave my guy $200 for the fender off and on. Now you have to pump the system down before you add the freon. Or just drive it up to a local AC shop and they will do it for you after you get the fender back on. The whole job cost me $345 ($200 + $145)
take to your chevrolet dealer
To replace the evaporator coil on a 1998 Plymouth Voyager, first, disconnect the battery and remove the dashboard to access the HVAC unit. Drain the refrigerant from the AC system, then disconnect the hoses and electrical connections from the evaporator. Remove the screws and clips securing the evaporator coil, take out the old coil, and install the new one in reverse order. Finally, reassemble the dashboard, reconnect the refrigerant lines, and recharge the AC system.
how do you replace evaporator coil 95 grand prix
To remove the AC evaporator coil from a 1998 Chevy pickup, start by disconnecting the battery and draining the refrigerant from the AC system. Next, remove the dashboard and the HVAC assembly, which involves detaching various components like the heater hoses and electrical connectors. Once the HVAC unit is accessible, unbolt the evaporator coil from its housing and carefully extract it. Reassemble in reverse order, ensuring all connections are secure and leak-free before filling the system with refrigerant.
Where is the coil pack located on a 1998 Chevy Malibu with 2.4 engine
No you have to replace it.
To replace the evaporator coil in a 1985 S10 pickup, first, disconnect the vehicle's battery and drain the air conditioning system to remove refrigerant. Remove the dashboard and the heater assembly to access the evaporator coil, which is typically located inside the HVAC box. Disconnect the old coil's refrigerant lines, unbolt it from the housing, and replace it with the new coil. Reassemble the HVAC system, reconnect the refrigerant lines, and refill the AC system with refrigerant before testing for leaks.
what is the coil firing order on a 1998 chevy venture van with a 3400 engine?
Next time you replace the coil, test and if necessary replace the resistor.
very difficult, better off saving yourself the headache and taking it to a shop
The indoor coil acts as an evaporator coil for heating.
Coil