Radiator Removal & Installation All gasoline-engine equipped trucks use a cross-flow radiator. In this type, the coolant flows horizontally from a radiator inlet tank to a radiator outlet tank. # Remove the retaining clips for the radiator support brace trim cover and remove the trim panel from the vehicle. # Remove the fan shroud-to-radiator retaining bolts. # Place the special fan removal tools over the water pump pulley bolts and onto the fan clutch hub and loosen the fan clutch assembly. # Remove the fan clutch from the water pump and remove the fan clutch and the shroud assembly from the vehicle. # Slide the hose clamp back and remove the upper and lower hoses from the radiator. # Remove the recovery tank hose from the radiator. # Using a back-up wrench to support the radiator fitting, loosen the transmission cooler lines from the radiator and plug the lines to prevent contamination from entering the transmission. # The radiator is retained by two upper support mounts. # Remove the radiator upper support mounts bolts and remove the support mount brackets from the radiator. # Remove the radiator by lifting it straight out of the engine compartment The installation is the reverse of the removal.
How do you replace a radiator on 2003 ford expedition?
how to replace radiator in 2001 ford escape 3.0 engine
On a 2001 Ford Expedition : The thread on cap on your engine coolant reservoir is the ( 16 PSI ) pressue cap / radiator cap
On a 2001 Ford Expedition : The thread on cap on your engine coolant reservoir is the pressure cap / radiator cap
Check out the guide to replace the side mirror on a 2001 Ford Expedition http://www.techwarelabs.com/articles/other/Ford_Expedition_Side_Mirror_Replacement/index.shtml
The radiator hoses will need to be disconnected. Remove the cooling fan. Unbolt the radiator and any shroud surround and the radiator will come out. Reverse to install.
Remove the tail light housing and replace the bulbs.
Drain the water from the radiator. Remove the radiator hoses. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
To drain the radiator on a 1999 Ford Expedition, place a bucket under the radiator. Unscrew the radiator drain hose or valve on the bottom of the radiator. Remove the radiator cap.
The radiator cap is on top of the radiator.
Speed sensor on a 2001 ford expedition
The 2001 Ford Expedition has a V8 engine.