Need instructions please on replacing left side headlight assembly to
2002 Ford Mustang
See *Headlight* under Maintenance and Service - Replacing Bulbs, in your "Owner's Manual" (Removing the Headlight Housing Assembly makes life a lot easier).....
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
To remove the headlight assembly on a 2002 Infiniti I35, first, open the hood and locate the headlight assembly. Remove the clips or screws securing the assembly, which may include a bolt near the top and clips on the side. Carefully pull the assembly forward to detach it from the vehicle, and disconnect the electrical connectors. Once disconnected, the headlight assembly can be fully removed.
By removing the locks that hold the headlight assembly in place you can wiggle the headlight assembly out to gain access to the headlight bulbs for replacement.
To replace the headlight on a 2002 Mitsubishi Galant, start by opening the hood and locating the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the electrical connector from the back of the headlight bulb and replace the bulb by twisting it counterclockwise. Finally, reassemble the headlight assembly, secure it with screws or clips, and test the new headlight.
To remove the headlight from a 2002 Jaguar, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove the plastic cover or fasteners securing the assembly. Disconnect the electrical connector and remove any screws or bolts holding the headlight in place. Carefully slide the headlight assembly out of its housing to complete the removal.
To change the headlight assembly on a 2002 Chevy Silverado, first, open the hood and disconnect the negative battery cable for safety. Remove the screws or clips securing the headlight assembly, typically found on the top and side of the assembly. Carefully pull the assembly out and disconnect the wiring harness. Install the new assembly by reversing the steps, ensuring the wiring is securely connected and the assembly is properly aligned.
Open the hood, stand in front of the effected headlight, notice the two tabs sticking up behind the radiator support in back of the headlight assembly. These tabs are locks that hold the headlight assembly in place. Lift the tabs up and remove them. Now you can wiggle the headlight assembly out the front and remove the bulb. Reverse for assembly.
remove front headlight assembly to get at horn,it is down below light assembly..
To replace the headlight on a 2002 Mazda Tribute, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the electrical connector from the back of the headlight bulb, twist the old bulb counterclockwise to remove it, and install the new bulb by twisting it clockwise. Reconnect the electrical connector and reattach the headlight assembly, securing it with the screws or clips.
You don't. Instead, you replace the entire assembly.