0
Assuming all the spokes have the same mass and density distribution, I do not think there is any reason a 7 spoke wheel should be inherently inbalanced, as long as the angle between adjacent spokes is equal to 360/7 degrees. Similarly, a 3 spoke wheel would be balanced if the angle between adjacent spokes was 120 degrees. If you draw a line from one side of the wheel to the other that passes through the centre of the wheel and then calculate all the compenent forces parallel to that line, you will see they all balance out. Look up adding vectors and finding the component of a force if you want to do the maths. The doubt makes sense because 360/7 results in a fractional value unlike say 360/3 but one must remember that it is possible to analyze this fraction up to the required degree of accuracy. Also wheels anyway have to be balanced by adding weights after the manufacturing so as to correct errors in the manufacturing process so the same can be applied over here.
What else can I help you with?
Is Iodine and water a heterogeneous or homogeneous mixture?
A heterogeneous mixture is a mixture of two or more substances that are not uniformly distributed. The iodine and water in the question are not homogeneous because they are not uniformly distributed.
An uniformly distributed load is one which?
A uniformly distributed load is one which the load is spread evenly across the full length of the beam (i.e. there is equal loading per unit length of the beam).
Are chlorophyll molecules uniformly distributed in a plants?
no. the greener the part is the more it has, as a rule of thumb
Mixtures in which two or more substances are not uniformly distributed are what mixtures?
Solution
What is when the molecules become uniformly distributed they have reached?
When the molecules become uniformly distributed, they have reached equilibrium. This means that there is an equal concentration of molecules throughout the system, and no further net movement of molecules will occur.
Shall you please tell me hw the loads are taken by a beam?
loads are carried out as point load uniformly distributed load and uniformly varying load
Is pigment distributed uniformly in each mycelium?
Pigment distribution in each mycelium can vary. In some fungi, pigment may be uniformly distributed, while in others it may be concentrated in certain areas. Factors such as genetics, environmental conditions, and growth stage can influence how pigment is distributed within the mycelium.
What are two categories of mixtures?
The two categories of mixtures are heterogeneous and homogeneous. In a homogeneous mixture the components are uniformly distributed throughout the mixture. Homogeneous mixtures are solutions, such as salt water. In a heterogeneous mixture, the components are not uniformly distributed, such as granite, or Pizza.
What is a distributed load?
A uniformly distributed load (UDL) is a load which is spread over a beam in such a way that each unit length is loaded to the same extent.
What is a homogenous mixture and how is it different from a heterogeneous mixture?
A homogeneous mixture is one in which the components are uniformly distributed, so that it is the same throughout. A solution is a homogeneous mixture. A heterogeneous mixture is one in which the components are easily distinguishable and are not uniformly distributed. Granite is an example of a heterogeneous mixture.
What is the solution atoms or ions of a substance are distributed through the medium?
The solution is homogeneous mixture of atoms or ions of a substance distributed uniformly through the medium.
What are the 2 major classes of mixtures?
The two categories of mixtures are heterogeneous and homogeneous. In a homogeneous mixture the components are uniformly distributed throughout the mixture. Homogeneous mixtures are solutions, such as salt water. In a heterogeneous mixture, the components are not uniformly distributed, such as granite, or pizza.
