Replace the ignition cylinder wich should come with a new key and it will fix the problem.
security light on 1998 s10 start but cut off
To reset the security light on a 1998 GMC Sonoma, you need to first ensure that the vehicle is in the "Off" position. Then, turn the ignition to the "On" position without starting the engine and leave it for about 10 minutes until the security light turns off. After that, turn the ignition back to "Off" and then start the engine. If the light remains on or the vehicle doesn't start, you may need to check the key or the vehicle's security system.
mine does it all the time, most times i just manually unlock my door meaning by key and this shuts the security light off
Tampering or replacing ignition that does not match up with your key will cause your security to shut your car down.
if you have a "chipped " key, the security system is not recognizing the signal. Have you tried a spare key.?
Low coolant, check radiator and resevoir, if its nit low there is a low coolant sensor that may be bad , this is a knon issue on these cars, sensor is located about 2-3 inches down under the radiator cap on passengersid
To program the security warning light in a 1998 Buick Regal LS, you typically need to use the vehicle's ignition system. Start by turning the ignition to the "ON" position without starting the engine. Then, press and hold the "lock" button on the key fob for about 15 seconds until the security light flashes, indicating programming was successful. If your vehicle has specific security features or a factory alarm, consult the owner's manual for detailed instructions.
Disabling the security system on a 1998 Oldsmobile Intrigue is not straightforward, as it's integrated into the ignition system for anti-theft purposes. There are no specific fuses to pull that will disable the security feature; however, you can try resetting the system by using a working key in the ignition. If the security light remains on, it may indicate a malfunction that requires professional diagnostics. Consider consulting a mechanic or an automotive locksmith for assistance.
If the security light is flashing you need to change the ignition switch it self. It is likely worn out.
SeaScope - 1998 Social Security 1-45 was released on: USA: 1998
Light - 1998 was released on: USA: 1998
it is located somewhere near the fog light switch and/or security LED. IT LOOKS LIKE A SWITCH. yeah... it is located somewhere near the fog light switch and/or security LED. IT LOOKS LIKE A SWITCH. yeah... it is located somewhere near the fog light switch and/or security LED. IT LOOKS LIKE A SWITCH. yeah...