0
Just torque the rocker pedestal bolts to 30-35 ft/lbs. Wind the motor over on the starter motor with the plugs out + the ignition coil lead earthed for about 30 seconds to get the oil pumped up to the lifters first. Then proceed as normal - don't worry if the motor "rattles" for a minute or so when you fire it up the first time, it's all good.
What else can I help you with?
Where can you find the bleeder valve?
where do you find the bleeder valve on a Ford Diesel F-250 6.0
Where is the Location of PCV Valve on 1997 ford F-250 HD with 7.5L?
Passenger side valve cover. It is threaded into the valve cover.
Where is Egr valve location 2008 Ford F-250 6.4?
on engine manifold
Where is the egr valve on a 2006 Ford F-250 5.4?
There is none. The emissions are controlled with the PCM.
What is timing setting for 250 ford engine?
Need more info. Year, engine, exc.
Where is the PCV valve located on your 2001 ford f-250 power stroke 7.3 liter engine?
does not have a pcv valve just breather hose from valve cover to intake
Why does 1982 Ford F-250 surge when running?
FUEL pressure, or possible egr valve malfunction.
Where is the PCV valve on a 1989 Ford F 250 with a 5.8 L 351 windsor?
It is on the back of the valve cover on the passenger side very hard to get to though.
What is the point gap setting for 1973 Ford F-250?
On a 1973 Ford F-250 : The point gap for the V8 engines is ( .017 inch ) and for straight 6 cylinder engines ( .027 inch )
What is the ignition points setting for a 1970 Ford F-250 390 engine and spark plug setting?
Points .017 and spark plug .035
What iron setting is 250 degrees?
Most curling and clothes irons have a setting of 250 degrees. Depending on the iron, 250 degrees can be a low or a high setting.
What is the correct spark plug set up for a ford econoline 250?
5.4 eng spark plug setting is .052-.056
