answersLogoWhite

0

Empty and remove the fuel tank. It is inside the tank mounted with the level sensor. (remove it from the top)

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How can you wire up a power window on a Chevy truck?

can you show me the wiring diagram or schematics for a Chevy truck


How do you replace the door speakers on a 1996 Chevy s-10 pick up truck?

You need to remove the entire door pannel. There are manuals that show you how to do it.


Show you the kick down linkage for a 79 Chevy 350 eng. truck?

Show you the automatic transmission, passing gear linkage for a 79 Chevy 350 eng. truck


Where is blower motor resister on 1994 Chevy G20?

AutoZone.com will show you a pic.............


Show how to replace fuel pump on 1984 Chevy s-10 truck?

The pump should be in the top of the gas tank. First disconect the battery. If there is gas in the tank remove what you can. There should be brackets across the tank which need to be removed. Then lower the tank, disconect the fuel lines and replace.


Show you how to replace a heater core in 92 Chevy G20 van?

help me preplace heater core in 92 Chevy van g20


How do i Bypass Chevy starter solenoid?

how do you put a solenoid when theres a solenoid on a starter .I have a1981 Chevy scotdale truck and when the truck is warn i try to restart it hestiates when i do that a mechanic shop tells me that i need to by pass my starter so how do i do that . show me a video if you have one. thanks?


Will 1973-87 Chevy truck drop spindles fit 1967-72 Chevy truck?

My sources show there are different part numbers for spindles on the 1967-70 (drum brakes), 1971-72 (disc brakes) and 1973-87 (disc brakes).


Chevy s10 1994 show me how to hook it up so it will work?

Hook up what? Need more info.


Why does Chevy truck voltage display show drain when accessories are in use?

Sounds like the alternator is not charging. Check charging system.


How do you replace fuel injection spider 1994 Chevy Blazer and show a diagram?

To replace the fuel injection spider on a 1994 Chevy Blazer, first, disconnect the negative battery cable and relieve the fuel pressure by removing the fuel pump fuse and running the engine until it stalls. Then, remove the intake manifold, disconnect the fuel lines, and take out the old fuel injector spider assembly. Install the new assembly, reattach the fuel lines, and reassemble the intake manifold before reconnecting the battery and testing the system. For a detailed diagram, refer to a repair manual or online resources specific to the 1994 Chevy Blazer.


How do you replace the windshield wipers on a 2001 Chevy Tracker?

There are several types. Go to the parts store and most will show you how to change them