It is at the engine end of the top radiator hose. Remove the hose and the 2 retaining bolts and remove the housing and thermostat. Clean both surfaces and install thr thermostat.jd
It is located at the engine end of the top radiator hose.
Drain the radiator down 1/2 way into a container. Remove the top radiator hose from the engine end. The housing is where the thermostat is located. Remove the 2 bolts and the housing. Remove the thermostat and clean the surfaces and install the thermostat.
It is located under the hood in the power distribution box.
The 2000-2005 Chevrolet Impala only came with a 3.4 and 3.8 V6 (6 cylinder) engines. Are you sure that you don't have a Malibu instead? at the emd of the upper rad hose you will find the thermostat housing. Take the 2 bolts out and remove it. When reinstalling it make sure the spring on the thermostat goes toward the engine.
The thermostat is located in the housing where the upper radiator hose connects to the engine.Remove the 2 bolts and remove the thermostat.
It is under the hood in the power distribution center.
The thermostat is located on the engine of a 6.0 vortex 2000 Chevrolet Silverado 2500. The thermostat can be found by following the upper radiator hose directly to the thermostat.
You did not mention the engine size. Regardless, it is in the thermostat housing on the intake manifold.
It is located on the bottom right hand side of the radiator.
There is only one and it is located in the side tank of the radiator.
on the water pump. follow the top hose from your radiator. it attaches to the block at the thermostat housing.
picture of location of thermostat for 2000 chevorlet impala