Remove the three 8mm screws holding it in
1999 dodge intrepid is not starting I change crank and camshaft sensor and it stall will not start what can i do next.
To change the heater core in a 1999 Dodge Dakota, first, disconnect the battery and drain the cooling system. Remove the dashboard and the heater box cover to access the heater core; this typically involves removing several screws and clips. Disconnect the hoses attached to the heater core, remove it from the housing, and replace it with the new core. Finally, reassemble the heater box, dashboard, refill the cooling system, and reconnect the battery.
The Cummins engine doesn't have glow plugs. It has an intake manifold heater grid.
The heater hoses are 5/8 inch diameter.
Instualation of a heater core on a 1999 Ford Explorer V6, how do you install the heater core.
A 1999 Dodge Ram does not have a water control valve.
heater core
It is inside the HVAC housing, under the dash.
It should be in the heater blower motor case which is located under the glovebox.
99 Durango doesn't have a Heater Control Valve, It only has a thermostat
Its a Durango.......not a Drango.
yes