pull the whole dash out its hard to do cause im doing one now
How do you remove the heater core on a 1997 Toyata Corolla?
You will need to remove the anti-freeze from your 1997 Chevrolet Venture cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Drain the water from your 1997 Chevrolet Lumina cooling system. Remove the water supply lines to your heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Begin by training the water from your 1997 Pontiac Bonneville cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To remove the heater core from a 1997 Cadillac Seville, start by disconnecting the negative battery cable. Then, drain the engine coolant and remove the dashboard and center console to access the heater core. Disconnect the heater core hoses from the engine compartment, and unbolt the heater core from its housing. Finally, carefully remove the heater core from the vehicle, taking care not to damage any surrounding components.
There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.
remove the entire dash
To remove the heater core from a 1995 Ford F-800, start by disconnecting the battery and draining the coolant. Next, remove the dashboard panel and any components obstructing access to the heater core, including the heater core cover. Disconnect the hoses attached to the heater core, then unbolt and carefully remove the heater core from its housing. Reinstall the new heater core by reversing these steps, ensuring all connections are secure.
To remove the heater core from a 1984 Mazda RX-7, first, disconnect the negative battery cable and drain the coolant from the cooling system. Next, remove the dashboard and the center console to access the heater core housing. Disconnect the hoses attached to the heater core, then unbolt and remove the heater core from its housing. Reinstalling the new heater core involves reversing these steps, ensuring all connections are secure.
you might be able to just go through the back of the glovebox to get to the heater core
To remove the heater core from a 1994 GMC Vandura 2500, start by disconnecting the battery and draining the coolant from the radiator. Remove the dashboard and the HVAC housing to access the heater core, which is typically located behind the dashboard on the passenger side. Disconnect the heater core hoses from the engine compartment, then unbolt the heater core from the HVAC housing and carefully pull it out. Reinstall the new heater core by reversing these steps.
it should be below the radio in the heater box . must remove entire dash