0
What else can I help you with?
Why does right indicator stop working when brake pedal is pressed?
The right indicator may stop working when the brake pedal is pressed due to a wiring issue or a faulty electrical connection in the vehicle's lighting system. When the brake lights are activated, they may draw power from the same circuit that operates the turn signal, causing the indicator to malfunction. Additionally, some vehicles have a shared circuit for turn signals and brake lights, which can lead to this issue if there is a fault. It's advisable to check the vehicle's electrical system and fuses for any problems.
Tachometer speedometer and trans shift indicator quit working 1995 Chevy truck?
check for an open fuse or check the vss (vehicle speed sensor)
How do you tell if the overdrive on an automatic vehicle if its working or not?
There are several red flags that can indicate overdrive is not working on an automatic vehicle. If a car is shifting in and out of gear or out of overdrive is usually the first signal of a problem. Other signals include low fluid levels and and erratic temperature sensor.
What does the turn signal have to do with the brake lights on a Denali?
im not familair with that make of vehicle but. the brake lights anf the signals are supposed to be separte. they both plug into a harness near the back of the vehicle. if your brake lights are working with your signals, you might have something crossed. take it to an expert you trusst and let them check it out.
Passat 04 tdi indicator lights are not working?
If a Passat 04 TDI's indicator lights are not working, check the fuse. A blown fuse can cause the lights to stop working.
Why does your Hyundai Excel 2000 indicator light and brake light stop working all the sudden?
The 2000 Hyundai Excel indicator light and brake light might stop working all of a sudden because of a burned out bulb. Check all bulbs on the brake lights and turn signals. This problem could also be caused by a blown fuse or a blown flasher fuse.
What causes the turn signals on a 1994 Ford Ranger to stop working?
if only the turn signals are not working,you should replace the flasher can
Signal arrow on left indicator flashes rapidly bulbs ok on holden barina 2005 lights not working?
Turn left indicator signal flashes rapidly when I use indicator, bulbs ok, no lights working
If traffic lights were not working and you get into a fender bender still all your fault?
If the traffic signals do not work, it is to be treated as a four-way stop sign. It says so in the vehicle code.
Why might the turn signals in the dash of a 2000 Pontiac Firebird not work?
If the turn signals in the dash don't work, what about the outside front and rear turn signals? Working? Not working? If it's not working, replace the turn signal relay under the dash.
How do you replace front indicator on a corsa xsi 2005 model?
To replace the front indicator on a 2005 Corsa XSI, first, ensure the vehicle is turned off and the keys are removed. Open the bonnet and locate the indicator assembly; you may need to remove a few screws or clips to access it. Disconnect the wiring harness from the old indicator, remove the old bulb or assembly, and then insert the new indicator. Finally, reconnect the wiring, secure the assembly back in place, and test the indicator to ensure it’s working properly.
How do you change a side indicator on seat leon 2005?
To change a side indicator on a 2005 Seat Leon, first, locate the indicator lens on the side of the vehicle. Carefully remove the lens by twisting or prying it off, depending on the design. Once the lens is off, pull out the old bulb and replace it with a new one, ensuring it fits securely. Finally, reattach the lens and test the indicator to ensure it’s working properly.
