Rods and Rocker arms were the problem with my Malibu after changing lifters
Cheap gas
Which way should the holes in the side of the lifters be facing when they are installed in the motor in a 2001 chevrolet mailibu mo
Alternator is not charging. Have it tested and/or replaced.
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.
It's not recommended to change just the lifters. The cam and lifters should be replaced together. To get at the lifters, you can remove the rocker covers and intake manifold, loosen the rockers enough to get the pushrods out, then pull out the lifters.
it could be a faulty gage or a bad oil pump
The sun visor on a Chevy Malibu can be replaced by first removing the retaining screws and sliding it out of the mounting bracket. A new visor can then be put into place and bolted in.
hydralic lifters
Its the Primary o2 Sensor (pre-cat), needs to be replaced
Chevy did not build a Malibu in 1995.
valves,lack of oil or oil pressure.........the clock?
Axle seal is bad and needs to be replaced