Go to autozone.com and look in the repair info or specification.
where are the timing gear marks on a 1997 chev s10 2.2 located
The timing marks for the cam sprocket on a 98 S10 is on the front. The marks for the crank shaft is on the oil pump gear.
There is no external timing marks on 2001 Saturn.
The timing marks on your 2001 Volvo S40 can be found on the outside of the main pulley. The timing marks will be scattered around the edge of the pulley.
On a 1987 2.8L S10, the timing marks align on the harmonic balancer and the timing cover. You should look for a notch or mark on the harmonic balancer and align it with the appropriate timing degree mark on the timing cover. Typically, for proper ignition timing, you would align the marks at around 0 degrees BTDC, but always refer to the specific service manual for precise settings.
timing marks 1.8lt Mitsubishi 2001
On a 2001 Smart Car, the timing marks for the timing chain are located along the cam sprocket and the edge of the links. They must be matched together to ensure proper initial timing.
Chain, be it a 4.3L or the 2.2L
The 2.2 4 cylinder has a chain
what are the timing and marks on an 2000 Hyundai accent
On a 2001 Kia Optima, the timing marks can typically be found on the crankshaft pulley and the timing cover. The crankshaft pulley usually has a notch or a mark that aligns with a reference point on the timing cover. For the camshaft, timing marks are located on the camshaft gears, which align with specific marks on the cylinder head. Always refer to the vehicle's service manual for precise locations and alignment instructions.
on the harmonic balancer there are two marks, one set at 12o'clock and set at 3o'clock, standing in front of the engine, where do both marks need to be set?