0
The caliper bolts are 13 mm, so use a socket or wrench, if not too tight. a "C" clamp works well to push the caliper piston back into the caliper housing. That's it, change the pads and put back together. Also, best to use some brake cleaner to clean the old brake pad dust from the caliper and rotor, and should use some lub on the new pads at all points that contact the caliper. Have the rotor turned if they seem to be scored, if not don't turn them. Turning the rotors will thin the surface, making them more prone to heat warping.
What else can I help you with?
What tools are needed to change the rear brake pads on a 2002 Impala?
basic tools are all that are needed its a simple job. They are disc type brakes.If you can do the front, then you can do the rear.
How do you change front brake pads on a 1996 Ford Taurus?
what tools are needed
What tools are needed to change front brake pads on a 2003 Toyota Highlander?
Changing your own front brake pads can save hundreds of dollars. Tools needed for the job are a jack, the brake pads, lug wrench, socket wrench, and brake fluid.
What tools are needed to change brake pads on a 1998 Chevy Monte Carlo?
ratchet or socket
How do you change a 2001 chevrolet's impala brake pads?
FRONT OR REAR?
How do you change rear brake pads on 2003 Chevy Impala?
Remove the tire and wheel from your 2003 Chevy Impala. Remove the brake assembly spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.
What tools needed to change front brake pads 1991 Chevrolet caprice?
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
What tools are needed to change the front and rear brake pads on a 2003 Mitsubishi Eclipse GT?
You will need a hoist, a socket wrench set and a torque wrench. You will also need the brake pads, brake fluid and brake grease.?æ
How do you change the brake light switch on 1985 Chevrolet Impala?
It is mounted on a bracket under the dash at the brake pedal. From there it is self explanatory.
How do you change the 3rd brake lite on a 94 impala ss?
You can gain access to the bulb from the trunk?
What tools are needed to change front brake pads and rotors on 1994 ford explorer?
Lug wrench, metric socket set, "C" clamp
What are the essential bicycle brake tools needed for maintenance and repair?
The essential bicycle brake tools needed for maintenance and repair include a set of Allen wrenches, a cable cutter, a brake caliper alignment tool, a brake pad alignment tool, and a set of cone wrenches. These tools are necessary for adjusting and replacing brake components to ensure proper functioning of the brakes.
