answersLogoWhite

0

it would be helpful to know which engine you are referring to. 1.8L 56 to 60 lbs 1.9L step 1 30 to 40 lbs step 2 loosen two turns step 3 44lbs step 4 tighten 1/4 turn from step 3 step 5 tighten 1/4 turn from step 4 2.0L has two different torque specs. remember to use new head bolts (old ones tend to be stretched)

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What are the cylinder head torque settings for a Mazda bongo 2.5 turbo diesel 1997?

what are the torque for camshaft and cylinder head bolts please


What are the torque settings for Nissan Patrol 4.2 diesel cylinder head and valve clearances?

What are the torque settings for Nissan ZD 3 liter turbo diesel cylinder head and valve clearances?


What are the cylinder head torque settings for Ford Focus 2.0 tdci diesel?

what is the head bolt torque settings on a ford focus 2007 tdci 2.0 diesel


Isuzu 2.8 liter turbo diesel head torque settings?

main bearing bolt torque settings


What are the Kia 2.7 Diesel cylinder head torque settings?

The head bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per square inch. The bolts should be torqued at 35 pounds to begin with.


What are the torque settings for Mazda E2200 diesel cylinder head?

30N.m, then 90 degrees, then another 90 degrees.


What are the cylinder head bolt torque specs for a 1.9 D Peugeot engine?

i need the head torque settings for peugeot 1.9 diesel motor


Ford Focus 1.8 diesel 8v cylinder head torque settings?

35nm 90 degres 90 degres


What are the cylinder head torque settings for a 1993 Mitsi Pajero diesel?

hi i belive them to be 115 to 125 nm, that is what the setting is in my manual


Where can you find the various torque settings required for rebuilding a Mitsubishi canter diesel engine?

torque settings on diesel four cly Mazda engine


What are the torque settings on a fiesta diesel injector?

The torque settings for the diesel injector on a Ford Fiesta can vary depending on the specific engine model. Generally, the injector bolts are typically torqued to around 20-25 Nm (14.8-18.5 lb-ft). It's essential to consult the vehicle's service manual for the precise specifications and any specific procedures related to your particular model. Always follow the manufacturer's guidelines for accurate results.


What are the cylinder head torque settings for Ford Mondeo 2.0 tdci diesel?

For the Ford Mondeo 2.0 TDCi diesel engine, the cylinder head bolt torque settings typically involve an initial torque of 30 Nm followed by a further 90-degree turn. It's important to follow the specific sequence when tightening the bolts to ensure even pressure across the cylinder head. Always refer to the vehicle's service manual for the most accurate specifications and procedures.