Key on, engine off. Press gas pedal to the floor three times in 10 seconds.
Change the sensor located on rear-end housing
All that info can be found in the owners manual.
Turn on Ignition - depress gas pedal 3 times- turn off ignition
Turn on Ignition - depress gas pedal 3 times- turn off ignition
Turn ignition on with engine off. Press gas pedal to the floor three times, cycle key off and on.
on all dodge trucks the way you change the bulbs is simply unscerew the tail light assembly and remove it from the rear of the vehicle and you will see your lightbulb fittings right on the back of the light assembly
To reset the change oil light on a 2013 Dodge Grand Caravan, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, the oil change light should turn off. If it doesn't reset, repeat the process to ensure it was done correctly.
the socket should just turn out in the back under the hood.
Turn on Ignition - depress gas pedal 3 times
how do i change driver side turn signal bulb on 1992 dodge caravan?
You must turn your drivers side wheel all the way to the right and remove the plastic panel in order to access the battery. I get to do this today, yay...
Change the fuel filter or drain the water out of the fuel filter.