never use it
yes They are all the same on the body parts
If you get the PCM, engine wiring harness, and intake manifold from the Regal also..
The only way I know is to take it to the dealership. Some are suppose to charge $40 for this.
A 1982 Oldsmobile was built to use R12, it would need retrofitted to R134a..
We have a 1998 Intrigue and I can tell you why we were losing power and it was getting kinda' scary, although it would start right up again after I pulled over, put it in park and restarted it. We had an oil leak and it was dripping on to a sensor.
if its got a 3.5 you need 6 qts.
Do you mean "how do I replace washer line"? They are just rubber hose from the washer fluid container to the wipers. If you have a leak, you can get a plastic splice and put it in at the split to repair.
To add transmission fluid to a 1998 Oldsmobile Intrigue, first ensure the vehicle is on a level surface and the engine is running. Locate the transmission dipstick, which is typically found near the back of the engine compartment, and remove it. Use a funnel to pour the appropriate type of transmission fluid into the dipstick tube, checking the fluid level with the dipstick to ensure it is within the recommended range. Be cautious not to overfill.
i need a wiring diagram with pictures to help put my ignition switch back together on my 99 olds intrigue
i have to put freon R-134 into my 99 3.8 L, its in the center rear, (away from headlights). you can tell because there is a black nob hooked up to the silver in color tube. with the do it yourself stuff its hard because its in an akward position but wasnt realy designed for it i guess. just un screw the black nob on the silver tube that is center rear under the front hood.
The 1992 Oldsmobile Cutlass Supreme uses R12 freon and needs 36 ounces. R12 is no longer being made, but is still being recycled and is still available through online auctions.
Yes since that is the proper type of freon.