Open driverside soor and look at the side of your dash. Remove fuse box cover and it will be in there.
you dont
The airbag control module on a 2000 gmc Sierra 1500 is usually mounted at the bottom of the radiator. There is one placed on each side of the radiator.Ê
The 2000 GMC fuse box is located in the engine compartment. The function of each fuse is listed on the inside cover of the fuse box.
Yes, there is a fuel sensor in a 2000 GMC Sierra.
It is located on the drivers side, side of the dash between door.
The ECM B fuse on a 2000 GMC Sierra is located in the underhood fuse box. To access it, open the hood and locate the fuse box, which is typically located near the driver's side near the firewall. The fuse diagram on the cover of the fuse box will indicate the specific location of the ECM B fuse. It's usually a 10-amp fuse, so you can check its condition if you're experiencing issues with the engine control module.
The 2000 GMC Sierra OBD 2 port is on lower edge of dash; right of parking brake
The factory alarm on a GMC Sierra pickup truck can be reset by removing the fuse. Take the fuse out for 10 seconds and replace it. This will reset the alarm.
It is located in the fuse panel.
Your 2000 GMC Sierra Vortec might be hard to start because the battery or the starter are worn or dead. The GMC Sierra might also be hard to start because of a clogged fuel filter.
The fuse box on a 1986 GMC Sierra is located on the divers side at the edge of the instrument panel. There is another fuse box located under the hood on the divers side up near the windshield.
35 Gallons