0
Directing under the VECI label / sight shield, which is the long black plastic cover located next to the latch for the hood. The label is bolted down with 4 screws; under the label is the relay control module, a black box held to the car's chassis by two screws. There is a bundle of wires running from the RCM to a connector.
What else can I help you with?
Where is the body control module on a 2000 Ford Taurus - Mercury Sable?
The 2000 Ford Taurus body control module is located on the firewall in the engine compartment. The module will be on the passenger side, near the bottom, of the firewall.
Where is the shift module on a 1997 Ford Taurus?
were is the shift module on a 1997 Ford Taurus
Where is the distributor cap in a 2003 Ford Taurus?
There isn't one. All 2003 Ford Taurus use a coil pack under the control of the Powertrain Control Module instead of a distributor.
Where is the control module on a 1989 ford bronco?
Passenger footwell outer panel
Where is fuel pump relay on 2001 Ford Taurus?
Where is the fuel module on a ford taurus 2001
Where is the idle screw on a 06 Ford Taurus?
The idle speed is controlled by the computer ( PCM , Powertrain Control Module )
When was Ford Taurus SHO created?
Ford Taurus SHO was created in 1989.
2002 Ford Taurus fan only works on highest speed?
Try replacing blower control switch or module.
What is a code 19 for 99 ford Taurus airbag?
Code 19 for a 99 Ford Taurus means the restraint control module crash data memory is full. If you replace the RCM, the code will reset.
Where is the ignition control module on a 1995 Ford Taurus sho 3.2?
if there is a DIS module (side of the air intake, pass side) then there is no distributor DIS = distributorless ignition system
Where is ignition control module on 2001 Ford Taurus?
It's the box with 6 plug wires on top driver side of throttle body
Where is the computer module for a 2001 Ford Taurus?
The computer module for a 2001 Ford Taurus is located just behind the glove compartment. This provides a level of safety for the computer and allows for easy access to the ODBII port.
