Inside the tranny
Inside the transmission
Under
Replace the slave cylinder.
4.5 quart
what are the torque specs for a head on a 2.2 liter gmc sonoma
I drive a 2000 gmc sonoma. My jack is behind the passenger seat in a built in box. Hope this helps.
The 2000 GMC Sonoma has four speakers with the standard sound system. An upgraded sound system came with six speakers.
235/55/16 is stock on a 2000 gmc sonoma...tough size
To replace the lock cylinder in a 2000 GMC Sonoma, first, disconnect the battery to ensure safety. Remove the steering column covers by unscrewing any screws and gently prying them apart. Insert the key and turn it to the "Run" position, then locate the release pin on the lock cylinder housing and push it in while pulling out the old cylinder. Finally, insert the new lock cylinder, ensuring it clicks into place, and reassemble the steering column covers before reconnecting the battery.
Probably about 6
The engine oil capacity for a 2000 GMC Sonoma with a 4.3L V6 engine is approximately 5 quarts (or about 4.7 liters) when using a filter. It's always best to check the owner's manual or consult with a mechanic for the most accurate information specific to your vehicle.
It is a big job. You must drop the transmission. Then you slide the slave valve off the transmission input shaft. While you are there spend the money and go ahead and replace the clutch if it is really old.