0
On an older vehicle like this , would start at 10 degrees BTDC; vaccum line to distributor plugged while setting timing.If it pings, back it off 2 degrees, if it does not ping under load, add 2 degrees. According to the repair manual timing should be 8 BTDC (6 degrees BTDC for calif. emissions and high alt.)
What else can I help you with?
How do you set the timing belt for your 98 suburban?
It does NOT have a timing belt, That engine has a timing chain and gears.
Does a 2000 Chevy Suburban 5.3 have a timing chain?
Yes , the 5.3 litre V8 engine in a 2000 Chevrolet Suburban has a timing CHAIN
Do you need a timing light to set your 1996 suburban?
NO. A timing light will not work on that engine. You must have an obdII engine scanner to set the timing on that year.
Can you adjust the timing on a 1998 7.4 gmc suburban and if it does what's the number?
Yes, you can adjust the timing on a 1998 GMC Suburban with a 7.4L engine. The timing is typically set to 0 degrees BTDC (Before Top Dead Center) for base timing with the engine at idle. It's important to use a timing light to ensure accurate adjustments, and any changes should be done with the engine warmed up and the proper procedures followed as outlined in the vehicle's service manual.
How do you set the timing on a 2001 suburban?
You MUST have a OBDII engine scanner to set the timing. It is computer controlled.
How do you adjust timing on a 99 Chevy 5.7 liter suburban Ditributor has been removed?
THE TIMING IS COMPUTER CONTROLLED. It requires an engine scanner to set the timing on that engine.
What is the timing for a 1999 Chevy suburban 5.7 liter 350 ci?
You can not use a timing light to set the timing on that year engine. The timing is computer controlled and it requires a engine scanner to set the timing.
When should you change the timing chain on a Chevrolet Suburban?
Timing chains are designed to last the life of the engine and are normally replaced during a complete engine rebuild.
How do you set the timing on a 1994 gmc suburban?
To set the timing on a 1994 GMC Suburban you need to warm up the engine while the car is either in park or neutral. Next, you adjust the distributor until the timing is set to where you want it.
When should you change the timing chain on a Chevy Suburban?
Normally the chain will last the life of the engine and is replaced when the engine is overhauled.
What is the ignition timing of 1.6 dohc engine?
the ignition timing is 6 degree BTDC.
What is the BDCT ignition timing degree on a 1991 Chevy Suburban 5.7?
you should set it at 0 degrees btdc
