0
According to the factory service manual:
Castor service checking should be +1.7 degrees, but is not adjustable.
Camber service checking should be 0 +- .5 degree Service setting is 0 degrees.
I am not equipped to do wheel alignments so I have never really learned much about them, so I take mine to a shop.
I hope that will be of some value to you, perhaps another can give any other information.
What else can I help you with?
Is there camber adjustment on 1997 CHEVY s10?
Adding or removing the shims on the upper control arm can adjust camber and caster.
How to do Front end alignment on 1991 Chevy suburn?
Alignments are best left to the pros as special guages are required to measure the angles of at least Caster,Camber, and Toe. The Upper Control Arms on this vehicle do have Cam adjustments for Camber and Caster but Factory Plugs must be removed before adjustment can be made.
How do you adjust the camber on a 1990 chevy k1500 4x4?
how do u adjust the camber on a 1990 Z71
Does a G20 Chevy van have shims?
There are several shims that could be used such as starter shims (for adjusting drive gear to ring gear), caster/camber shims (for front end alignment), body shims (for aligning body panels),
What causes erratic caster-camber changes on a newly rebuilt Chevy 20 van front suspension?
The first thing that I would check is the ball joints. Make sure that they are installed correctly or are not bad. This could be one thing to check.
1982 Chevy celebrity?
OK, you have a 1982 Chevy Celebrity. Do you have a question?
Where is the caster-camber adjustment on a 2001 Chevy truck?
I have a maunual that states, "Camber and castor can be adjusted, but only after an adjustment kit at GM dealers, is installed. My manual is 1988 thru 1998, All Models and 1999 and 2000, C/K Classics, 2WD and 4WD. I also experience this when I had new tires installed and asked them to align it. They couldn't and I was quoted about $200.00 dollars labor to install the kit. This could very easily apply to your 2001 Chevy.
Where is the caster and camber adjustment on a 1984 Chevy truck?
Located where upper a arm bolts to vehical you will see 2 1/4 in bolts come off from fram you will see 2 stacks of rectangle shape shims with lock nut holding them n place
What are a caster specs for k1500 1998 Chevy?
The caster specifications for a 1998 Chevy K1500 typically range from 3 to 5 degrees positive caster for optimal handling and stability. It's important to check the specific alignment settings recommended in the vehicle's service manual, as they may vary slightly based on the type of suspension and any modifications made to the vehicle. Proper caster alignment helps improve steering response and maintains straight-line tracking. Always consult a professional for precise adjustments.
Torx for a Chevy celebrity?
Yes there are Torx fasteners used in a Chevy Celebrity.
How do you put in a CD player in a 1991 Chevy Celebrity?
There is no such thing as a 1991 Chevy Celebrity
Where is a the relay for the tail lights on a Chevy Celebrity?
There is no relay for the tail lights on a Chevy Celebrity.
