In a 1991 Oldsmobile Toronado, the cooling fan resistors are typically located near the cooling fan assembly, often mounted on or near the radiator support. They are usually found close to the fan motor to regulate the speed of the fan. If you're having trouble locating them, checking the vehicle's service manual can provide specific details and diagrams for easier identification.
The 1987 Oldsmobile Cutlass cooling system has a fluid capacity of 5.5 gallons. The cooling system fluid should consist of 50 percent antifreeze.
The 1991 Oldsmobile Cutlass cooling fan relay switch can be found attached to the right side of the radiator housing. The cooling fan relay switch should be labeled as such.
3100 v6
2
When building a PC you will need to position the cooling fans. You should refer to the documentation to work out how to do this.
The cooling fan on a 1993 Oldsmobile Delta 88 is located behind the radiator and the wires are attached on the left hand side. The relay is located on the frame near the left headlight.
If it has separate blower speed controls for the front and rear, it has separate resistors. Blower speed resistors are mounted close to the blower motor it controls for cooling purposes.
Fix the leak, and fill the coolant.
The cooling fan fuse on a 1994 Oldsmobile Achieva is located in the fuse box under the dashboard on the driver's side. You can access the fuse box by opening the driver's door and removing the cover. Look for the fuse labeled for the cooling fan or cooling system in the diagram on the fuse box cover. If you're unsure, consult the owner's manual for the exact location and specifications.
The 1995 Oldsmobile Aurora cooling system temperature sensor can be found on the front of the engine. The sensor will be above the thermostat housing.
Under the hood in a big black bulky fusebox.
195-210 Cooling fan should start at 235