0
44ft lbs on all and then go back an additional 95 degrees. (95 degrees is just over a quarter turn) Make sure you follow the correct torque sequence. That might be a little difficult to explain with out a photo but I will try. There are 4 bolts across the bottom and 4 across the top. If you are standing at the front of the car facing it. Bottom row 2nd bolt from the left. Top row 2nd bolt from the left. Top row 3rd bolt from the left. Bottom row 3rd bolt from the left. Bottom row 1st bolt on the left. Top row 1st bolt on the left. Top row 4th bolt from the left (last one on right) Bottom row 4th bolt from the left (last one on the right) You should always replace your head bolts once you have torque them down to get the correct torque.
What else can I help you with?
How do you install cylinder head bolts on a 1996 Saturn?
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
What are the torque specs for the bolts on the engine cylinder head?
The torque specs for the bolts on the engine cylinder head can vary depending on the specific make and model of the vehicle. It is important to consult the manufacturer's specifications or a repair manual for the exact torque values.
What are the torque specifications for the Toyota 1zz cylinder head bolts?
36 ft lbs and then 90 degrees
How much is the torque of 2c cylinder head bolts Toyota?
torque for 2c engine cylinder head bolts
Torque setting for cylinder head bolts for a Skoda felicia?
torque setting for cylinder head bolts for a skoda felicia
What is the torque specs on a 2002 Kia Sedona cylinder head?
The torque specifications, for your 2002 Kia cylinder head, is 120 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
What are the torque specifications for Toyota 22REC cylinder head bolts?
58 ft lb inner to outer clockwise staging...
What is the cylinder head torque specification for 95 Isuzu NPR?
Ford CFord Cylinder Head Torque Specificationsylinder Head Torque Specifications
What is the torque specifications for the head bolts on a 2.2 liter 4 cylinder out of a caviler?
The Chevrolet 2.2 liter engine had bolt torque specification is 120 pounds. The head bolts should be torqued in 40 pound intervals.
Torque specifications for cylinder head 2003 kia Rio 1.6L?
The torque specifications for the cylinder had, in your 2003 Kia 1.6 liter engine, is 120 pounds per square inch. The bolts should be torqued at 40 pound intervals.
What is Toyota Camry cylinder head bolts torque specs?
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
What are the torque specifications for Toyota 21r-c cylinder head bolts?
The torque specifications for the cylinder head bolts on a Toyota 21R-C engine typically require an initial torque of 22 ft-lbs (30 Nm) followed by a final torque of 43 ft-lbs (58 Nm). It's important to follow a specific tightening sequence and to ensure that the bolts are torqued in multiple steps as per the manufacturer's guidelines. Always refer to a service manual for the most accurate and detailed specifications.
