The wheel may be bent. Take the vehicle to a trusted tire shop and have them remove and test the wheel to see if it is bent. The squeaking noise sounds like the brake pads are worn out. You need to have this looked into for the safety of you and your family.
Your wheels may be squeaking at low speed due to worn-out brake pads, lack of lubrication on the wheel bearings, or a loose suspension component. It is important to have your vehicle inspected by a mechanic to determine the exact cause of the squeaking noise.
Usually tapered roller bearings.
Vibrations that come through the breaks squeaking can cause the irritating squeaking that we have come to know. The high frequency of the vibrations results in the high pitch squeaking. Alternatively, the squeaking can come from the disc that secures the brakes, when the vehicle is coming to a stop.
Depends on the vehicle and which bearings. Wheel bearings, not so expensive. Main bearings inside the engine, expensive.
Do you have to pay a motor vehicle accident and for how long
less friction.
You must remove the wheel bearings, inspect them, repack them with grease, and install them back in the vehicle.
I think best solution would be to contact a local dealership or trusted shop which sell car parts. I would also visit trusted car mechanic if I was looking for new bearings.
The owners name and address should be listed on the accident report as well as the driver of the vehicle and who was at fault in the accident.
form_title= Automotive Bearing form_header= Keep you car running like new when you replace the bearings. How old are your current bearings?*= _ [50] What brand do you currently have on your vehicle?*= _ [50] How often do you drive your vehicle?*= _ [50]
No. If it was your own vehicle and you caused the accident then it is entirely your responsibility that the damage was caused and that you get it fixed.
It more than likely needs new bearings. That is why it is out of line, unless the vehicle has been in an accident. Remove the belt, and remove the tensioner idler pulley and repair it.