Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
remove the upper and lower covers on the steering column. ignition switch has a couple of bolts holding it on the left side. may require a female torx socket to remove. Has large wiring harness that plugs to bulkhead connector underneath dash.
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition.
How to remove ignition switch
hi i need to remove ignition from an audio 1993 how do i do it
remove steering column cover, disconnect wiring connector from switch, remove retaining screw from back of switch, remove switch. that is not enough
1996 rodeo- how to remove key from lock ignition?
how to remove power steering pump
Its right above the ignition coil. Infact you have to remove it first to remove the ignition coil.
Push the key into the ignition. To remove, push in, then turn towards you to remove the key. I do not know how to remove and replace the whole ignition assembly in case that was your real question.
You have to have the key to that ignition to remove it. You can get a locksmith maybe. The dealership can make you a key from your vin# definitely good luck.
You need to specify which parts of the ignition system you intend to remove. You can remove ignition from your vehicle entirely by removing the ignition coil wire from the distributor but I don't think that's the answer your looking for.