answersLogoWhite

0

you have a bad blinker switch in the steering column chryslers have a problem with wires getting to hot and burn together causing a short I think you're right. When the flasher doesn't work, I can hit the lower dash by the relay/flasher and it'll work. Darn local dealer wanted $50 for the flasher module! I can get online for about $30........I'll post my results. : : My JGC had the same problem, and I have replaced the multifunction stalk two times without any success,but after replacing the relay unit everything was back not normal again.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

What could be the problem when turn signals blink twice then stay off on a 2000 Oldsmobile intrigue?

not sure what causes it, but sometimes my signals will just not work. with lever still in position to activate signal, push button for hazards. then put signal lever in "off" position. turn off hazards. signals should work. temporarily anyway.


What causes all turn signals and hazards to stop working all at once?

First check the flashers fuse .Then replace the flasher with a good one. There might be two-one for turn signals and one for 4ways. Or they could be one.


1997 528i your hazards do not work but your turn signals do work What's wrong there?

many possible causes, but first look at a faulty hazard button switch assembly faulty.


What causes the turn signals on a 1998 Chevy Corvette click real fast and sometimes not click at all?

Turn signal flasher


What causes turn signals not to work sometimes on 2005 gmc envoy?

Check the 2005 GMC Envoys turn signal flasher. The flasher could have an intermittent issue causing the signals to not work.


What are causes of hazards?

One of the causes of environmental hazard is heavy metals. However, light pollution, Mercury, and molds are also other environmental hazards.


What are the causes of hazards?

One of the causes of environmental hazard is heavy metals. However, light pollution, Mercury, and molds are also other environmental hazards.


Causes of hazards?

Hazards can be caused by natural events like earthquakes and floods, as well as human activities such as industrial accidents and pollution. Other causes include climate change, deforestation, and inadequate infrastructure. Understanding the root causes of hazards is key to effectively preventing and mitigating their impacts.


What are the hazards in petrochemical industry?

exposure to toxic substances and explosive situations causes hazards in petrochemical industry.


What are the causes of environmental hazards?

One of the causes of environmental hazard is heavy metals. However, light pollution, Mercury, and molds are also other environmental hazards.


What causes Cherokee Jeep to burnt?

fire=hot


How spoilage of land causes health hazards?

Spoilage of the land causes health hazards because it can seep into the water or food supply. This is then consumed by humans and animals which can cause a variety of problems.