The 6.0L uses the Ford Gold coolant. If your just draining the radiator you will need 2 gallons of the gold coolant then top off with an additional 2 gal of water until full. No additional additives are needed. The gold coolant already has FW-16 in it, unlike Ford green coolant which is used in the 7.3L and FW-16 needs to be added to the green coolant when servicing all 7.3L powerstroke cooling system. Hope this helps.
ford premium gold coolant , also mask the dealer about the diesel coolant additive
The type of coolant to use on a Ford 7.3 diesel is Motorcraft Premium Gold Engine Coolant. Motorcraft Gold provides optimal protection for the engine.
use the pink coolant. any other coolant in 6 l will gum up and can damage engine
Red, 5 year, HOAT type.
For a 2006 Ford Taurus, it is recommended to use a coolant that meets Ford specification WSS-M97B44-D. Typically, a blend of ethylene glycol-based coolant with a 50/50 mix of water is suitable. It's important to use a coolant that is either orange or yellow in color, which indicates it is designed for extended life and has the necessary additives to protect the engine and cooling system. Always check the owner's manual for specific recommendations.
All today's Ford engines, both petrol and diesel, use 5w/30. This type of oil is readily available on supermarket shelves and the containers marked "Suitable for Ford petrol and diesel engines".
Green with With DCA attivate that you can get at ford dealer or parts stores it uses test strips to check PH level to prevent cavation.
For the 1999 Ford expedition it is recommended that you use the Ford Premium engine coolant which is green in color. You should not use the Ford extended life engine coolant which is orange in color.
The recommended coolant type for a Ford Taurus is the green coolant. There are several different brands such as Prestone.
The Ford F-350 diesel typically requires about 2 to 3 gallons of antifreeze, depending on the engine size and whether you're performing a full coolant flush or just topping off. It's important to use a coolant that meets Ford's specifications, often a low-silicate, phosphate-free formula designed for diesel engines. Always refer to the owner's manual for the exact capacity and recommendations for your specific model year.
No, you should not put diesel coolant in a gas engine. Diesel coolant is formulated differently and may contain additives that are not compatible with gas engine cooling systems. Using the wrong coolant can lead to corrosion, overheating, and potential engine damage. Always use the coolant specified by the manufacturer for your gas engine.
The coolant capacity for a 2006 Ford Focus is approximately 7.5 quarts (or about 7 liters) when including the engine and the radiator. It's essential to refer to the owner's manual for specific details, as variations may exist based on the engine type and cooling system configuration. Always ensure to use the appropriate coolant type recommended by the manufacturer.