From my '72 manual, it's TDC =/- 2.5°
a slant 6 does in fact have a timing chain but it rarely ever wear out, break, or stretch, because of the durability of a slant 6.
Check ignition timing Timing chain "jumped"?
The population of Slant Six Games is 100.
Slant Six Games was created in 2005.
Yes. The degree and slant of the ramp does affect the speed of the car
To set the timing marks on the timing gears of a 1969 Dodge Dart with a 225 Slant Six engine, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Align the timing mark on the crankshaft gear with the mark on the timing cover, and then align the camshaft gear's mark with the corresponding mark on the timing chain or cover. This ensures that both the crankshaft and camshaft are properly synced for optimal engine performance. After aligning, double-check the marks before reassembling any components.
slope
hot wire on the timing light goes to pos. side of the battery and the neg. side of timing light goes to ground on the engine someplace and then the plug clip goes on the #1 spark plug wire.
there were 2 or 3 different sizes of slant sixes.
Sorry, it will not fit. Although the transmissions themselves share the same internals and designations, the bellhousings are different and will not bolt together. A slant six transmission will only fit a slant six.
The oil used in a slant six cylinder is typically 10w-30.
Need to be more specific