answersLogoWhite

0

Find out why it overheated. Normally it is a stuck thermostat, clogged radiator, low of coolant, air in system, defective water pump, broken or slipping belt, defective fan motor, blown fuse, or defective fan motor thermal relay. If you stopped immediately then no damage was done.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What size oil filter do you need for a 2003 Dodge Intrepid that has the 3.5 liter?

Mopar pt # 5281090


How do you replace a starter in a 2000 Dodge Intrepid?

I need detailed information on how to replace a starter for a 2000 dodge intrepid


What kind of oil does a Dodge Intrepid need?

5w30


2003 Dodge Intrepid location of junction box?

In a 2003 Dodge Intrepid, the junction box is located under the dashboard on the driver's side. Specifically, it can be found to the left of the steering column, near the brake pedal. You'll need to remove the cover panel to access the fuses and relays within the junction box.


How do you Change oil sensor switch 2000 dodge intrepid?

how to change oil pressure switch in 2001 Dodge Intrepid I need to look at a diagram


What kind of oil does a 1999 Dodge Intrepid need?

5w30


I need a cooling system diagram for a 1999 intrepid 2.7?

I need a cooling system diagram for a 1999 dodge intrepid 2.7


What type of oil you need in a 1999 Dodge Intrepid?

5w305w30


How to change spark plug on 2004 Dodge Intrepid?

you need to pull the intake plenum


How tight does the bolts on a 94 Dodge Intrepid valve cover have to be?

The bolts on a 94 Dodge Intrepid valve cover need to be very tight. You should tighten to 12 N*m or 105 inch pounds.


Where is the fuel filter on a 2003 dodge intrepid?

On a 2003 Dodge Intrepid, the fuel filter is located inside the fuel tank as part of the fuel pump assembly. This design means that the fuel filter is not easily accessible for replacement without removing the fuel tank. Regular maintenance of the fuel system can help ensure it functions properly, but if you need to replace the filter, it typically requires professional assistance or a significant amount of work.


Do you need to replace all ignition coils on a dodge intrepid 3.2 if only one is bad?

No