spark plug cover:)
how do you change valve cover gasket 2004 hyundai elantra
they are located under the cover strip down the center of the engine. strokerace
Follow the bottom radiator hose to the engine block. The thermostat is behind the oval cover.
The PCV valve is located in the valve cover.
The power steering fluid reservoir on a 2011 Hyundai Elantra is typically located near the front of the engine compartment, on the driver’s side. It is a small, translucent container with a cap that may be labeled with a steering wheel icon. To access it, you may need to remove any engine cover or cover panel that is obstructing it. Always ensure the engine is off and cool before checking or adding fluid.
The valve cover bolts need to be torqued to 72 to 84 IN-LBS
On a 2007 Hyundai Elantra, the horn relay is located in the engine compartment fuse box. To access it, open the hood and find the fuse box, which is typically situated near the battery. The relay should be labeled on the inside of the fuse box cover, making it easier to identify.
whosale parts warehouse in cali. www.partswarehouse.com
In a Hyundai Elantra, the fuel injectors are located on the intake manifold, directly above the engine cylinders. They are typically housed within the fuel rail, which distributes fuel to each injector. Accessing them usually requires removing the engine cover and potentially other components, depending on the specific model year and engine type. Always refer to the vehicle's service manual for detailed instructions.
The only torque figures I have are for the Lantra 1.6Ltr Model year 1994 Engine code G4R Cam cover torque is quoted as 2-4 Nm.
In a 2000 Hyundai Elantra, the rear defroster relay switch is typically located in the engine compartment fuse box. You can find the fuse box near the driver's side of the engine compartment, usually near the battery. To confirm the exact position of the rear defroster relay, refer to the fuse box diagram printed on the cover or in the owner's manual.
On a 2001 Hyundai Elantra GLS, the water pump is located at the front of the engine, typically on the driver's side. It's mounted on the engine block and is connected to the timing belt or chain, depending on the specific engine configuration. To access it, you may need to remove components such as the timing cover and possibly the accessory belts. Always consult a repair manual for detailed instructions specific to your vehicle.