The D stands for diesel. LX is the model, one of the lower ranges. 1.9 is the engine size, 1.9 cc.
---------------------------------------------------------------------------------------------------------------- 1.9lt / 1900cc
New tensioner, as they are automatic.
3.2 litres
0.9mm
I shall answer with a question. What is your question?
Hi Just had mine done on a 2002 206 LX HDI with 120K on it Cost £150 from trusted local mechanic including labour and perfect now
unless im mistaken they havent used leaded fuel since at the latest the 60's...
The lambda sensors on a Peugeot 206 LX typically include both upstream and downstream oxygen sensors, often manufactured by brands like Bosch or Valeo. These sensors monitor the air-fuel mixture and help optimize engine performance and emissions. It's essential to check the specific model year and engine type for precise sensor specifications.
To reset the immobilizer on a Peugeot 206 LX, first ensure that you have both the key and the vehicle. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the immobilizer light on the dashboard turns off. Turn the key back to the "Off" position, then try starting the engine. If issues persist, it may require professional diagnostics.
In the Peugeot 206 LX, the switch for the rear fog light is typically located on the dashboard, near the headlight controls. It usually resembles a round dial or a small button with a fog light symbol on it. You may need to turn the headlight switch to the "on" position before activating the rear fog light. Check your vehicle’s manual for specific details, as the layout can vary by model year.
To tighten the fan belt on a Peugeot 206 LX, first, locate the tensioner pulley. Use a wrench to rotate the tensioner and release tension on the belt. Remove the old belt if necessary, then loop the new or adjusted belt around the pulleys according to the routing diagram. Finally, pull the tensioner back to apply tension on the belt and ensure it is properly aligned before securing everything back in place.
HI I have a 2000 206 gti and the relay is in the ecu fuse box under the bonnet next to the battery there are 3 the same though not sure which is which? there is also a 40 amp fuse in the internal fuse box under steering coloum.
1st is in the exhaust manifold, just in front of the engine block. 2nd is behind catalyser screwed in the exhaust pipe. You shoud see in looks like a sparkplug with whires :)