0
if i understood your question right then you may have a bad oil pressure switch or possibly the sensor my car has a oil light that comes on when i shut the car off and restart it but the oil level is fine just a faulty sensor, it goes away if i shut the car off and restart it if i was you i would constantly check your oil the only other thing it could be is a bad oil pump and you dont want that too go while your driving you'll blow your motor.
What else can I help you with?
How do you reset the Low Tire Pressure display on a 2003 impala?
While the ignition is in the ON position, follow this sequence:Turn your headlights to the parking position and then OFF 3x's.
How do you clear a check parking brake message?
This happened on my Laguna with the electronic parking brake. It transpired that it was the Clutch Position Sensor had gone. Fortunately, mine was still under a warranty from the dealer, so they paid for it, but it looks like an easy enough job if you get the part and have some tools...
How should you position your vehicle when parking uphill on the right side with a curb?
When parking uphill on the right side with a curb, position your vehicle with the front wheels turned to the left and against the curb. This helps prevent the vehicle from rolling into traffic if the parking brake fails.
How should you position your tires when parking uphill with a curb?
When parking uphill with a curb, position your tires so they are turned away from the curb. This will help prevent your car from rolling into the street if the brakes fail.
How do you reset the low tire pressure warning light on a 2001 Chevy Monte Carlo SS?
AFTER you inflate the tires to the correct pressure, turn the ignition to the on position. Then pull the headlight knob from the OFF position to the parking light position three times. This should reset the system. This is the easiest way but you can also reset it through the radio. If you would rather do it this way, it is on 6-44 in your owner's manual
How do you remove the warning message parking bulb failure on a Volvo S60?
Replace the burned out bulb
What is a position sensor used for?
A position sensor is used to tell the position, such as a position sensor used in some cars to aid parking. Similarly, a position sensor may be used in ultrasounds, to identify the position of body parts.
What does the brake warning light on a Chrysler Town and Country mean?
The red brake warning light is an indication of low fluid, a loss of pressure, or the parking brake being set.The red brake light stays on when the parking brake is set, the fluid is low, or there us a loss of pressure.
The parking brake on a Caterpillar Dump Truck is applied and released by what means?
the parking brake on caterpillar dump truck is spring applied and pressure released
How do you reset check parking brake message on Renault scenic?
To reset the "Check Parking Brake" message on a Renault Scenic, first ensure that the parking brake is fully engaged and then disengaged. Next, turn the ignition on without starting the engine and press the brake pedal. Finally, navigate to the vehicle settings on the dashboard display and select the option to reset warnings or service messages. If the message persists, it may indicate a more serious issue that requires professional inspection.
How do you reset the check parking brake message on Renault grand scenic and why has it come up?
Trip to the stealers Only..............
Why do the outside mirrors move downward in reverse on 2008 land rover?
The mirrors move to a second position to help with parking, you can adjust the position they move to.
