On a '92 Dakota:
Code 12 = standby power to the computer memory has been interrupted or lost.
Code 22 = a fault in the coolant temperature sensor circuit.
Code 24 = a fault in the throttle position sensor circuit.
Code 55 signals the end of the codes that were stored; there are no more stored codes.
Loose electrical connections and sometimes loose vacuum hoses can cause fault codes. Check for these problems. If you can correct them, the codes will be erased after five (I believe) successful re-starts.
Nothing. All of the diagnostic codes consist of 2 digits. 'Code 3' must be incomplete.
Check tht injector wiring harness for loose and corroded connections.
Codes on a 1992 should be 2 digit in length.Codes on a 1992 should be 2 digit in length.
Codes on a 1992 should be 2 digit in length.Codes on a 1992 should be 2 digit in length.
Fault code 16 means: Loss of battery voltage.
Diagnostic code 44 means: Battery temperature sensor voltage out of range.
You don't really. That is, the memory capacity and function is restored when you restore power, but any information stored in memory is lost permanently.
buy a book like Chilton, and it has all the diagnostic codes listed in it. buy a book like Chilton, and it has all the diagnostic codes listed in it.
charging system excess or lack of field current
Trouble code P0720 means:Output speed sensor circuit malfunction
Under the hood, passenger side of firewall.
Power to the pcm was lost or interrupted.Whenever your battery is disconnected to clear fault codes,code 12 remains in the computers memory,the code is erased automatically after 20-100 key on cycles depending on the year.